With one of the greatest designers of plasma cutting, Lotos Technology is pleased to give out an extensive section of industrial plasma cutting machine.
Lotos LT5000D Plasma Cutter has a design to withstand extensive use in the rough environment. It is also suitable for home projects too.
The Lotos LT5000D Plasma Cutter delivers strong cutting performance in a compact package. It uses MOSFET transistors that provide high power output for thick cutting as well as uniform output for thin metal cutting. It employs power switch technology that reduces the dimensions of the transformer significantly.
The LT5000Dis the best choice for home jobs and light duty small business jobs and using this cutter is cheaper than the Oxyacetylene.
You can use this great cutter to cut the stainless steel for lawn art, rebar gates and even demolition of various steel structures. It works flawlessly and with consistently good results. The unit is very easy to set up and operate.
Suitable For Stainless Steel
You can use this plasma cutter to cut stainless steel materials. It cuts the stainless steel materials like mild steel, alloy steel, copper aluminum and other heavy materials.
This cutter is suitable to do these cuts due to its best thermal conductivity. It performs much better with 220V hookup since at this voltage it can cut the heavier and stronger materials like mild steel. You will like this cutter.
Unlike the other existing cutters, Lotos plasma cutter unit allows you to access more variation when it comes to using. This is an interesting feature that has a benefit that allows the power tool to run on 110V 50/60Hz with the help of a Pigtail that is sold differently and directly on 220V 50/60Hz power.
The automatic Dual voltage and frequency property of this cutter allows you to switch between 110/220V and 50/60Hz with much ease making it more flexible.
Advanced Cooling System
The Lotos plasma cutter contains the PAPST Advanced cooling system to keep its temperature from going out of control. The system also regulates the damaging of the unit by itself by overheating.
For efficient cooling, the cooling system has a package that includes an air hole, air hose couplers, air regulator. With all these, you are sure of achieving cooling of the cutter enabling you to cut the tools continuously.
If other cutters in the market are beyond your reach because of their price, then this is your opportunity to own one of the Lotos Plasma cutters without having to drain your pocket.
With this unit, even with the extra parts, you will have to pay for to increase its performance. Their price is three times less than the more expensive brands and for just a few dollars you will own a Lotos plasma cutter that can cut through any stainless material.
Lotos Plasma cutter is helpful to use because it does not pollute the environment. It utilizes the non-hazardous compressed air to do this cutting. The Lotos plasma is easy to us; it cuts clean and does not stress your compressor.
Most reviewers give credence that this plasma is one of the best plasma cutting tools out there and offers the freshest cuts possible. With this I recommend you buy one cutter, and you will enjoy.
- Less maintenance
- Less fire hazard
- Easy to set up and operate
- Clean cuts
- High efficiency
- Hard to troubleshoot
Frequently Asked Questions
Q: What average circuit breaker is needed in my panel for zero 120V and 220V operation?
A: I have mine wired 220V with a 40A breaker. It works great, and I believe the manual indicates you use a 40A breaker. I also use 25A breaker for 120V.
Q: what is the minimum size compressor/ tank size that can be used with this Lotos plasma cutter?
A: it depends mainly on the metal thickness you are cutting, and Lotos suggests a minimum of 52 Lbs.
Q: does the Plasma Arc of the cutter start when the button is pressed or does it need to make contact to complete circuit?
A: It will start when the button is pressed and within about 0.0625 inches from the surface. It cuts clean leading to massive scum.
This particularly recommended plasma cutter earns its position on the list because most of the leading manufacturers make it. It has a high precision to deliver high quality cutting action even with rugged conditions within industrial areas.
Using the Lotos Plasma cutter is indeed cheaper than gas cutters because of their cost efficiency. Compared to DC plasma cutters, Lotos cutters cut even thicker materials, and there is less distortion in the material that you are cutting.
The cutter is easy to use. It has a lightweight that enables you to walk around with it cutting.
With this information, I recommend that anyone wishing to deal with plasma cutting should go for the Lotos Plasma cutter.